The electromagnetic pulse valve is used to control the direction of hydraulic flow. The electromagnetic pulse valve is a basic automation component used to control fluids. It is an actuator and is not limited to hydraulic and pneumatic. Solenoid pulse valves are used to control the direction of hydraulic flow. Factory mechanical devices are generally controlled by hydraulic steel, so solenoid valves are used.
There is a closed cavity in the electromagnetic pulse valve. There are through holes at different positions. Each hole leads to a different oil pipe. There is a valve in the middle of the cavity and two electromagnets on both sides. Which side of the magnet coil is energized? The valve body will be attracted to which side, by controlling the movement of the valve body to block or leak different oil drain holes, and the oil inlet hole is normally open, the hydraulic oil will enter different oil drain pipes, and then pass through the oil The hydraulic pressure pushes the piston, which in turn drives the piston rod, and the piston rod drives the mechanical device. In this way, the mechanical movement is controlled by controlling the current of the electromagnet.
For more details, please log in
RMF-25 electromagnetic pulse valve is used to control the direction of hydraulic flow